This 6AT gearbox is a fully electronically-controlled intelligent hydraulic automatic gearbox, with a shift time of less than 0.2 s, and it supports the skip of up to three gears. Down-shift shifter adopts an electronic gear lever, including P gear (parking gear), R gear (reverse gear), N gear (neutral gear) and D gear (forward gear). The transmission system of the gearbox consists of a hydraulic torque converter with torque increasing and locking functions and three planetary gear sets. The 6AT has the highest transmission efficiency in its class, with the highest transmission efficiency of 99.2% and the average transmission efficiency of 96.53%. In the process of vehicle driving, TCU can identify the level of vehicle driving slope, and improve vehicle driving safety and comfort by modifying the shift point of gearboxes.

New energy reducer, with the torque of 440 N.m, the maximum speed of 8000 rpm, the center distance of 108-149-209, and various speed ratios available.

New energy reducer, with the torque of 300 N.m, the maximum speed of 12000 rpm, the center distance of 95-125, and various speed ratios available.

New energy reducer, with the torque of 240 N.m, the maximum speed of 16000 rpm, the center distance of 81.5-121.5-189, and various speed ratios available.

New energy reducer, with the torque of 130N.m, the maximum speed of 8000rpm, the center distance of 68-106.5-169/62-99-189, and various speed ratios available.

The 6MT longitudinal rear drive, allowing the maximum input torque of the engine to be 50 N.m, with a three-axis structure, the center distance of 82 mm, six forward gears plus one reverse gear, and 14 sets of speed ratios are available.

The 6MT longitudinal rear drive, allowing the maximum input torque of the engine to be 420 N.m (360 N.m in the first gear), with a three-axis structure, the center distance of 82 mm, six forward gears plus one reverse gear, and 8 sets of speed ratios available.

The planetary carrier is made by powder metallurgy, and there are 6 planetary gears, each of which is equipped with two rows of needle rollers, which are firmly connected with the planetary carrier through pin rolls by pressing rivets. Planetary rows are meshed with the gear ring and the middle sun gear, and the meshing is stable.

The gear of EMR3 reducer is made of high-strength gear steel, and the gear honing and grinding process accuracy reaches DIN3962-6 level. The assembly can provide the highly-integrated electric shaft drive system with different power levels of 100 ~ 150 kW, and the maximum torque reaches 310 N.m.