No Technical specification Parameters Remarks 1 Operating voltage DC 9~16V IGN power supply 2 Operating frequency 58KHz±1KHz 3 Communication mode CAN/LIN/UART According to the needs of the vehicle manufacturer 4 Maximum detection range 2000mm±100mm Typical 1500mm 5 Extensions Buzzer/SPK Drive 6 Design channel Eight channels (4 at front, 4 in rear) Matching 2 to 8 sensors 7 Installation method Adhesive/ultrasonic weld/snap 8 Product features Small size, low cost and convenient installation Adaptive to high/low configuration 9 Working mode of main probe CAN/LIN+MCU+AMP+SENSOR 10 Working mode of auxiliary probe E524.09/E524.33 ASIC scheme 1. The 2nd generation digital parking sensor consists of 1 main sensor and 7 sensors. The sensors adopt the most advanced integrated digital ASIC chip from Germany, which have long detection distance and strong anti-interference ability. 2. The main sensor is provided with CAN or LIN communication; the controller is interfaced with and the in-car unit CAN bus or LIN bus data, with high transmission speed; the car unit displays the orientation and distance of obstacles in real time, and prompts the driver through hearing and vision; 3. The sensor is assembled to the front bumper and rear bumper. Whether the vehicle is in D gear or R gear, the sensor system automatically detects obstacle avoidance alarm prompt, so that low-speed driving is worry-free;

No Technical specification Parameters 1 Operating voltage DC 9~16V 2 Data storage GB Class A data 3 Communication mode CAN 4 Storage medium EEPROM 5 G-SENSOR SMA760/FXLS90322/ADXL375 6 Body size 112*89*28mm 7 Installation method Support the screw type 8 Ingress protection rating IP5K1 It is a device or system composed of one or more on-board electronic modules and having the function of monitoring, collecting and recording the data of vehicle and occupant protection system before, during and after collision event. The MCU microcontroller monitors the G-SENSOR in the system in real time and calculates the speed change in a continuous period of time. If the event trigger threshold is met, the system can record the vehicle operation and safety system status information before and after the node for a period of time. The system can effectively solve the problems that the accident cause is difficult to judge and the accident responsibility is difficult to identify, provide effective support for road traffic accident work, ensure the fairness and justice of accident treatment, and facilitate the creation of a good and orderly road traffic environment.

No Technical specification Parameters 1 Operating voltage DC 9~16V 2 Output resolution 1280×800 3 Frame rate 25fps/30fps 4 Transmission mode LVDS 5 Image sensor OV09284 6 Installation method Bracket clamping type 7 Ingress protection rating IP6K7 For (outdoor) face recognition camera, as a modern car's high-tech configuration, its main function is to identify and verify the facial features of the owner or authorized user, and to initiate the locking and unlocking procedures of the car. This configuration combines security and convenience to provide a keyless vehicle entry and use experience. The camera is mounted on the handle of the main driver's door and automatically activates when approaching the car, scanning and recognizing the facial features of the approaching person. Once an authorized facial feature is recognized, the door is automatically unlocked and the owner can enter the vehicle without a key. This identification process is very fast, saving users valuable time, while also greatly improving the safety of the vehicle. This product is of 100W pixels.

No Technical specification Parameters 1 Operating voltage DC 9~16V 2 Output resolution 1920×1080P/1920*1440P 3 Frame rate 25fps/30fps 4 Transmission mode LVDS 5 Image sensor OX03D40/SC220AT 6 Display type HD 2D+ HD 3D+ Single View + Mosaic 7 Body size 24*24mm 8 Installation method Bracket clamping type/bracket locking type 9 Ingress protection rating IP6K7 10 Extensions With SDK package The panoramic camera is installed in the front, rear, left and right sides of the car, providing users with a panoramic view in all directions. This feature captures real-time images from cameras around the vehicle and combines them to show the driver a 360-degree view of the vehicle's surroundings. Such a panoramic view will be displayed on the display screen of the vehicle, helping the user to understand the surrounding situation more comprehensively, solving the problem of blind spots and improving the safety of driving and parking. The panoramic camera is especially suitable for complex road conditions and crowded parking environments, which can reduce or avoid potential safety risks, making it safer and more convenient to move cars, merge, and leave garage. This product has 200W/300W pixels and supports SDK package expansion.

No Technical specification Parameters 1 Operating voltage DC 9~16V 2 Output resolution 1280×960P 3 Frame rate 25fps/30fps 4 Transmission mode LVDS/AHD 5 Image sensor OX01F10/SC120AT 6 Display type HD 2D+ HD 3D+ Single View + Mosaic 7 Body size 24*24mm 8 Installation method Bracket clamping type/screw type 9 Ingress protection rating IP6K7 10 Extensions With SDK package The panoramic camera is installed in the front, rear, left and right sides of the car, providing users with a panoramic view in all directions. This feature captures real-time images from cameras around the vehicle and combines them to show the driver a 360-degree view of the vehicle's surroundings. Such a panoramic view will be displayed on the display screen of the vehicle, helping the user to understand the surrounding situation more comprehensively, solving the problem of blind spots and improving the safety of driving and parking. The panoramic camera is especially suitable for complex road conditions and crowded parking environments, which can reduce or avoid potential safety risks, making it safer and more convenient to move cars, merge, and leave garage. This product has 100W pixels and supports SDK package expansion.

No Technical specification Parameters 1 Operating voltage DC 9~16V 2 Output resolution 640×480P 3 Frame rate 25fps/30fps 4 Transmission mode CVBS-NTSC 5 Image sensor OV07958/PC9030K/PC7070 6 Body size 24.3*34.3mm 7 Installation method Bracket locking type/subminiature design 8 Ingress protection rating IP6K7 The blind spot surveillance camera, which is fixed on the right A-pillar of the car, can get the real-time field of view on the right side of the vehicle, which is an area that drivers often cannot cover by relying solely on direct sight and mirrors. This blind spot surveillance camera and the display in the car form a complete blind spot detection system. During driving, especially in the case of merging, turning right, or being unable to directly view the right side of the vehicle body, the image of the blind spot surveillance camera of the right A-pillar will be displayed on the driver's display screen in real time. As an important configuration of vehicle configuration, blind spot surveillance camera has the function of improving driving safety. The device enables the driver to observe the right side of the car from a new perspective, thereby helping the driver to discover possible hidden dangers and perform corresponding avoidance operations, reducing or even avoiding corresponding safety risks, and greatly increasing driving safety and confidence. This product is of 30W pixels.

No Technical specification Parameters 1 Operating voltage DC 9~16V 2 Output resolution 1280×720P 3 Frame rate 25fps/30fps 4 Transmission mode LVDS 5 Image sensor OX01F10 6 Body size 24*24mm 7 Installation method Support the locking type 8 Ingress protection rating IP6K7 Reversing camera is a camera installed in the rear of the car. It is combined with the display screen installed in the car to form a complete reversing image system. When reversing, you can see the real-time video image behind the car. As the basic configuration of vehicle configuration, reversing video has the function of expanding the field of view behind the vehicle. When in use, the real-time image behind the vehicle will be displayed on the display screen, which can help users to complete parking more conveniently, reduce or avoid safety risks and complete parking operation. This product is of 100W HD pixels.

No Technical specification Parameters 1 Operating voltage DC 9~16V 2 Output resolution 1920*1080P 3 Frame rate 25fps/30fps 4 Transmission mode LVDS 5 Image sensor OX03C10 6 Body size 24*24mm 7 Installation method Support the screw type 8 Ingress protection rating IP6K7 For streaming camera, as a vehicle configuration, its main function is to capture and output high-definition images to the vehicle's display screen in real time, providing the driver with a clearer and broader view. This configuration is designed to help the driver better grasp the surrounding environment and improve driving safety and comfort. The real-time images provided by the streaming camera can replace the traditional rearview mirror, which not only eliminates the dead angle of sight and provides a wider field of view, but also has a powerful night vision function, so that drivers can clearly see the situation behind the vehicle no matter in day or night, no matter in rain or haze weather. In addition, streaming cameras can reduce eye fatigue and improve driver comfort. This product is of 200W pixels.

No Technical specification Parameters 1 Operating voltage DC 9~16V 2 Output resolution 1920*1080P 3 Frame rate 25fps/30fps 4 Transmission mode LVDS 5 Image sensor OV02778 6 Body size 50*32*28.7mm 7 Installation method Support the screw type 8 Ingress protection rating IP5K2 OMS(Occupancy Monitoring System) is based on image processing technology, and consists of IR+RGB camera and control unit. By detecting and tracking human visual features including face recognition, facial expressions, gestures and key points of limbs, characteristics of pets and articles, it analyzes the identity information, intentions and behaviors of passengers, and pays attention to personnel activities in the cabin and related article detection, and strives to provide a safer and more intelligent in-vehicle experience. It can provide gesture recognition, child recognition, carry-over recognition, occupant position recognition, etc. This product is of 200W pixels.

No Technical specification Parameters 1 Operating voltage DC 9~16V 2 Output resolution 3840*2160P 3 Frame rate 25fps/30fps 4 Transmission mode LVDS 5 Image sensor OX08B40 6 Body size 24.5*24.5mm 7 Installation method Support the screw type 8 Ingress protection rating IP6K7 The driving recorder camera is a common driving assistance device, which is usually installed on the front windshield of the car to record the whole driving process of the car. Compared with other types of vehicle cameras, the driving recorder camera captures real-time images in front of the vehicle more comprehensively. When needed, such as after an accident, these images can be used as important evidence to help resolve possible disputes. As an intelligent device configured for vehicles, the main function of the driving recorder camera is to provide driving records and accident evidence. It provides an unbiased, real-time first perspective, which can effectively provide drivers with driving evidence to prevent responsibility shifting after accidents, and plays an important role in enhancing driving safety. This product is of 800W pixels.

No Technical specification Parameters 1 Operating voltage DC 9~16V 2 Output resolution 1280×800P 3 Frame rate 25fps/30fps 4 Transmission mode LVDS 5 Image sensor OV09284 6 Body size 40*35.7*19mm 7 Installation method Support the screw type 8 Ingress protection rating IP5K2 DMS (Driver Monitoring System) is mainly used for fatigue driving warning. Fatigue driving warning system is a safe driving assistance technology, which is widely used in intelligent driving vehicles. Combining face recognition and iris recognition technologies such as face detection and face attribute analysis, and through the organic cooperation of camera and controller, the driver's face and eye feature data and steering wheel operation data can be obtained and comprehensively analyzed, so as to automatically detect the driver's fatigue and distraction during driving, provide early warning for the driver before the accident may occur, and have the function of remote monitoring in the background. It thus realizes all-weather monitoring of the driver's driving behavior during the day and at night and escorts the driver's safety in driving. This product is of 100W pixels

No Technical specification Parameters 1 Operating voltage DC 9~16V 2 Output resolution 1920×1080 3 Transmission mode CVBS/WIFI 4 Image sensor OV2718/PS3210 5 SOC MSC8339/PM1208 6 Installation method Bracket screw type/bracket adhesive type The driving recorder camera is a common driving assistance device, which is usually installed on the front windshield of the car to record the whole driving process of the car. Compared with other types of vehicle cameras, the driving recorder camera captures real-time images in front of the vehicle more comprehensively. When needed, such as after an accident, these images can be used as important evidence to help resolve possible disputes. As an intelligent device configured for vehicles, the main function of the driving recorder camera is to provide driving records and accident evidence. It provides an unbiased, real-time first perspective, which can effectively provide drivers with driving evidence to prevent responsibility shifting after accidents, and plays an important role in enhancing driving safety. This product is of 100W pixels, and the mounting method is by bracket screw/adhesive.

No Technical specification Parameters 1 Operating voltage DC 9~16V 2 Output resolution 1920*1080P 3 Frame rate 25fps/30fps 4 Transmission mode LVDS 5 Image sensor OV02775 6 Body size 40*25*30.27mm 7 Installation method Camping type 8 Ingress protection rating IP5K2 The driving recorder camera is a common driving assistance device, which is usually installed on the front windshield of the car to record the whole driving process of the car. Compared with other types of vehicle cameras, the driving recorder camera captures real-time images in front of the vehicle more comprehensively. When needed, such as after an accident, these images can be used as important evidence to help resolve possible disputes. As an intelligent device configured for vehicles, the main function of the driving recorder camera is to provide driving records and accident evidence. It provides an unbiased, real-time first perspective, which can effectively provide drivers with driving evidence to prevent responsibility shifting after accidents, and plays an important role in enhancing driving safety. This product is of 100W pixels.

No Technical specification Parameters 1 Operating voltage DC 9~16V 2 Output resolution 2880*1860P 3 Frame rate 25fps/30fps 4 Transmission mode LVDS 5 Image sensor OX05B1S 6 Body size 38*26*20mm 7 Installation method Support the screw type 8 Ingress protection rating IP5K2 OMS(Occupancy Monitoring System) is based on image processing technology, and consists of IR+RGB camera and control unit. By detecting and tracking human visual features including face recognition, facial expressions, gestures and key points of limbs, characteristics of pets and articles, it analyzes the identity information, intentions and behaviors of passengers, and pays attention to personnel activities in the cabin and related article detection, and strives to provide a safer and more intelligent in-vehicle experience. It can provide gesture recognition, child recognition, carry-over recognition, occupant position recognition, etc. This product is of 500W pixels.

No Technical specification Parameters 1 Operating voltage DC 9~16V 2 Output resolution 1920*1080P 3 Frame rate 25fps/30fps 4 Transmission mode LVDS 5 Image sensor OX03C10 6 Body size 24.5*24.5mm 7 Installation method Support the screw type 8 Ingress protection rating IP6K7 ADAS (Advanced Driving Assistance System camera) is an important vehicle configuration, mainly used to enhance the driver's driving safety and comfort. It helps drivers to judge and understand the road conditions more intuitively and avoid possible safety risks by monitoring the road conditions in real time, analyzing various data and transmitting them to the display screen of the vehicle. The ADAS camera is extremely powerful, it can not only monitor the vehicle ahead to prevent collisions; It can also realize pedestrian recognition to avoid potential threats to pedestrians; Besides, it can also identify road signs and pass this information to drivers to help them better understand road conditions and current vehicle status, enhancing driving safety. This product is of 200W pixels.

No Technical specification Parameters 1 Operating voltage DC 9~16V 2 Output resolution 1920×1080 3 Transmission mode LVDS 4 Image sensor OV2718/PS3210/AR0237 5 SOC MSC8339/PM1208 6 Installation method Bracket clamping type The driving recorder camera is a common driving assistance device, which is usually installed on the front windshield of the car to record the whole driving process of the car. Compared with other types of vehicle cameras, the driving recorder camera captures real-time images in front of the vehicle more comprehensively. When needed, such as after an accident, these images can be used as important evidence to help resolve possible disputes. As an intelligent device configured for vehicles, the main function of the driving recorder camera is to provide driving records and accident evidence. It provides an unbiased, real-time first perspective, which can effectively provide drivers with driving evidence to prevent responsibility shifting after accidents, and plays an important role in enhancing driving safety. This product is of 100W pixels, and the installation method is by bracket clamping.

No Technical specification Parameters 1 Operating voltage DC 9~16V 2 Output resolution 1600*1300P 3 Frame rate 25fps/30fps 4 Transmission mode LVDS 5 Image sensor OV02312 6 Body size 107*41.7*45.7mm 7 Installation method Support the screw type 8 Ingress protection rating IP5K2 OMS(Occupancy Monitoring System) is based on image processing technology, and consists of IR+RGB camera and control unit. By detecting and tracking human visual features including face recognition, facial expressions, gestures and key points of limbs, characteristics of pets and articles, it analyzes the identity information, intentions and behaviors of passengers, and pays attention to personnel activities in the cabin and related article detection, and strives to provide a safer and more intelligent in-vehicle experience. It can provide gesture recognition, child recognition, carry-over recognition, occupant position recognition, etc. This product is of 200W pixels.

No Technical specification Parameters 1 Operating voltage DC 9~16V 2 Output resolution 3840*2160P 3 Frame rate 25fps/30fps 4 Transmission mode LVDS 5 Image sensor OX08B40 6 Body size 24.5*24.5mm 7 Installation method Support the screw type 8 Ingress protection rating IP6K7 ADAS (Advanced Driving Assistance System camera) is an important vehicle configuration, mainly used to enhance the driver's driving safety and comfort. It helps drivers to judge and understand the road conditions more intuitively and avoid possible safety risks by monitoring the road conditions in real time, analyzing various data and transmitting them to the display screen of the vehicle. The ADAS camera is extremely powerful, it can not only monitor the vehicle ahead to prevent collisions; It can also realize pedestrian recognition to avoid potential threats to pedestrians; Besides, it can also identify road signs and pass this information to drivers to help them better understand road conditions and current vehicle status, enhancing driving safety. This product is of 800W pixels.

No Technical specification Parameters 1 Operating voltage DC 8~16V 2 Operating current Low power consumption average operating current <0.5mA 3 Communication mode CAN/LIN/PWM 4 Smoke detection response time ≤1S 5 Smoke detection accuracy ±15% 6 Installation method Support the screw type 7 Product features Adaptive detection of smoke concentration The national standard GB38031-2020 "Electric Vehicles Traction Battery Safety Requirements" specifies the thermal diffusion test of battery pack or system, and requires that the battery system shall not catch fire or explode within 5 minutes after thermal runaway of battery unit and shall not cause danger to passenger compartment. At the same time, a thermal event alarm signal shall be provided to reserve safe escape time for members. The alarm is assembled inside the battery pack, and the working principle is that in a detection chamber of an infrared light-emitting element and a photosensitive element with offset design, when smoke particles enter, the light emitted by the infrared light-emitting element is scattered or reflected by the smoke particles to the photosensitive element, and an alarm signal is sent out when sufficient light signals are received.

No Technical specification Parameters 1 Operating voltage DC 9~16V 2 Output resolution 1600*1300P 3 Frame rate 25fps/30fps 4 Transmission mode LVDS 5 Image sensor OV02311 6 Body size 36*25.7*20.5mm 7 Installation method Support the screw type 8 Ingress protection rating IP5K2 DMS (Driver Monitoring System) is mainly used for fatigue driving warning. Fatigue driving warning system is a safe driving assistance technology, which is widely used in intelligent driving vehicles. Combining face recognition and iris recognition technologies such as face detection and face attribute analysis, and through the organic cooperation of camera and controller, the driver's face and eye feature data and steering wheel operation data can be obtained and comprehensively analyzed, so as to automatically detect the driver's fatigue and distraction during driving, provide early warning for the driver before the accident may occur, and have the function of remote monitoring in the background. It thus realizes all-weather monitoring of the driver's driving behavior during the day and at night and escorts the driver's safety in driving. This product is of 200W pixels.

No Technical specification Parameters 1 Operating voltage DC 9~16V 2 Output resolution 640×480 3 Frame rate 25fps/30fps 4 Transmission mode LVDS 5 Image sensor MLX75027 6 Installation method Support the screw type 7 Ingress protection rating IP5K2 As an advanced vehicle configuration, the main function of 3D TOF camera is to capture the spatial information of objects through infrared light and sensors, so as to generate 3D stereo images of objects in real time, provide more complex and accurate viewing angles, and help drivers grasp the surrounding environment more comprehensively. The camera works by shining a beam of infrared light on an object and then generating a 3D model of the object by calculating the time it takes for the light to bounce back and accurately measure the distance. The application of this technology in cars can help drivers detect and understand surrounding objects, such as pedestrians, animals, obstacles or other vehicles, thereby improving driving safety. 。 This product is of 30W pixels.

No Technical specification Parameters Remarks 1 Operating voltage DC 9~16V 2 Output resolution 640×480P 3 Frame rate 25fps/30fps 4 Transmission mode CVBS-NTSC Differential signal output 5 Image sensor OV07958/PC9030K/PC7070 6 Body size 24.3*34.3mm 7 Installation method Bracket clamping type/bracket locking type 8 Ingress protection rating IP6K7 1. Reversing camera is a camera installed in the rear of the car. It is combined with the display screen installed in the car to form a complete reversing image system. When reversing, you can see the real-time video image behind the car. 2. As the basic configuration of vehicle configuration, reversing video has the function of expanding the field of view behind the vehicle. When in use, the real-time image behind the vehicle will be displayed on the display screen, which can help users to complete parking more conveniently, reduce or avoid safety risks and complete parking operation. 3. This product is of 30W SD pixels.

No Technical specification Parameters 1 Operating voltage DC 9~16V 2 Output resolution 1920*1080P 3 Frame rate 25fps/30fps 4 Transmission mode LVDS 5 Image sensor OV02775/PK5210 6 Body size 40*25*30.27mm 7 Installation method Support the screw type 8 Ingress protection rating IP5K2 AR navigation camera is a kind of high-tech configuration of vehicle using augmented reality technology. Its main body has the function of driving recorder, providing more intuitive and realistic navigation experience for drivers. This configuration captures the road ahead of the vehicle through the camera, and combines GPS navigation to superimpose the navigation information on the real-time driving image in real time to guide the driver more intuitively. The AR navigation camera enables the driver to see the real-time situation of the road ahead very clearly, and at the same time, the navigation information, such as the turning arrow and the intersection distance, can be seen on the display screen, which greatly improves the convenience and safety of driving. This type of navigation is not only better able to handle complex intersections and guide drivers in the right direction, but also has a good auxiliary effect at night or in low visibility. This product is of 200W pixels.