SCE

Sulfide solid electrolyte product 
Foreign body and defective battery detection solution of battery production line 
It can provide improvement solutions for foreign body and defective battery detection in battery production line, detect smaller foreign bodies, improve Hipot detection, improve K value detection, reduce false alarm rate and improve detection rate. 
Heavy truck swap station products 
High-safety and high-rate semi-solid battery S300 
High safety: The safety performance meets the requirements of national standard (GB-T38031) 
5mm puncture (25mm/s); 170℃ hot box 
High rate: charge 80% SOC within 12 minutes, 3C discharge up to 90%(0.33C) 
Long cycle: 2000 cycles 
The high specific energy system (customizable) is adopted, which is mainly suitable for experimental R&D, project samples, small electric devices, electric tools and vehicle power batteries, etc. The product has the characteristics of good safety, high rate performance and high energy density 
High-safety and high-rate semi-solid battery S363 
Smart energy management system products 
Park energy monitoring: energy operation monitoring, comprehensive grasp of real-time energy consumption in the park 
Comprehensive energy planning and analysis: park energy planning, multiple energy cooperation and complementarity, full use of renewable energy 
Energy analysis and optimization: statistical analysis of energy consumption cost, optimization of energy use strategy, and improvement of energy use efficiency 
Intelligent equipment O&M: intelligent equipment control of energy collection, storage and use, operation monitoring, event alarm, system life cycle management 
Smart energy management system products 
High-safety and high-rate semi-solid battery S363 
High safety: The safety performance meets the requirements of national standard (GB-T38031) 
5mm puncture (25mm/s); 170℃ hot box 
High specific energy: The energy density is up to 363 Wh/kg 
High rate: 2C discharge 85%(0.33C) 
Long cycle: 1200 cycles                                          The high specific energy system (customizable) is adopted, which is mainly suitable for experimental R&D, project samples, small electric devices, electric tools and vehicle power batteries, etc. The product has the characteristics of good safety, high rate performance and high energy density 
High-safety and high-rate semi-solid battery S300 
Heavy truck swap station products 
Skid station: 15 vehicles per hour, rapid deployment no more than 5 days, large capacity expansion, etc. 
Automobile standard on-board power exchange system: Through the combination of top-mounted and side-exchange power exchange technology and three-source heat pump, it realizes efficient waste heat recycling of vehicle motors and effectively prolongs the endurance mileage. 
Next generation of MTB battery replacement system: The battery pack and battery frame are structurally integrated, and the double-sided cell cooling and built-in insulation are adopted to achieve "one reduction and one increase". 
Foreign body and defective battery detection solution of battery production line 
Sulfide solid electrolyte product 
Product S1: ion conductivity >10 mS/cm, D50=10 μm 
Product S2: ion conductivity >4 mS/cm, D50=1 μm 
Product S3: ionic conductivity >2 mS/cm, D50=500 nm 

Case presentation

Test and detection service Sichuan SEVCLAB Technology Co., Ltd. is a wholly-owned subsidiary of Prof. Ouyang Minggao Academician Workstation (Sichuan New Energy Vehicle Innovation Center Co., Ltd.), which focuses on battery safety, builds a one-stop service platform for testing, certification, scientific research and engineering, and provides high-quality "material + battery" and "Internet + testing" product quality testing services, comprehensive scientific research and engineering technical services, annual inspection of new energy vehicles and accident investigation services for innovation centers, incubation enterprises and other scientific research institutes and enterprises in the field of new energy and new materials. It covers the fields of battery material testing, electrical performance testing, battery failure analysis, scientific research and trial production.